1. Get the necessary tools

Montaje del kit de la Original Prusa i3 MK2S

• 1. Introducción
• 2. Y-axis assembly
• 3. Montaje del eje X
• 4. Montaje del eje Z
• 5. Montaje del extrusor
  1. Get the necessary tools
  2. 3D printed parts
  3. [TIP] Top nut insertion
  4. Placing the nuts
  5. Preparing the extruder body
  6. Preparing the extruder cover
  7. Placing the extruder cover
  8. Preparing the extruder motor
  9. Mounting the motor and the idler
  10. Tighten the motor screws gently.
  11. Tightening the pulley
  12. VIDEO for step 11
  13. Prepare the Extruder idler
  14. Preparing shaft with bearing
  15. Prepare the Extruder idler screws
  16. Placing the screws
  17. Preparing the Front print fan
  18. Preparing the fan nozzle
  19. P.I.N.D.A. probe preparation
  20. P.I.N.D.A probe and print fan cables preparation
  21. The P.I.N.D.A. probe tighting
  22. Mounting the Left hotend fan
  23. Preparation for step 24
  24. Preparing for extruder mounting on the X-axis
  25. Extruder cables preparation
  26. Arranging extruder cables
  27. Securing extruder in place
  28. Cable management
  29. Cable management - right side
  30. Attachment of the Extruder cable holder
  31. Tighten the Extruder cable holder
  32. Preparing the filament
  33. Spiral wrap ziptie
  34. Finalizing the extruder
  35. All done!
• 6. Montaje de la pantalla LCD
• 7. Montaje Fuente alimentación & Base calefactable
• 8. Montaje y conexión de la electrónica
• 9. Comprobación previa