English

Prusa Research a.s.

Prusa Research a.s.

Support
Original Prusa MMU3
Original Prusa MMU3 Assembly
10A. MK4/S, MK3.9/S Setup and Calibration | Attaching the MMU unit (part 1)

1. Attaching the MMU unit (part 1)

Step 1 of 25 (Chapter 12 of 15)

Contents

Comments

⬢The MMU3 unit should be placed onto the top part of the printer's frame.

⬢Place the MMU3 unit onto the frame.

Attach it just by the top hooks.

⬢Look from behind, there are "clamps", which will be used to lock the unit to the frame in the next step.

Loading...

Contents

Original Prusa MMU3 Assembly

1. Introduction
2. MMU2S Disassembly (UPG)
3. MMU2S Buffer Disassembly (UPG)
4. Idler Body Assembly
5. Selector Assembly
6. Pulley Body Assembly
7. Cassette Buffer Assembly
8. Spool holder Assembly
9A. MK4/S, MK3.9/S Nextruder mod
9B. MK3S+ / MK3.5 Extruder mod (KIT)
9C. MK3S+ Extruder (UPG)
10A. MK4/S, MK3.9/S Setup and Calibration
10B. MK3S+ Setup and Calibration
10C. MK3.5 Setup and Calibration
11. First Flight

Comments

Log in to post a comment

Enduristan

•

about 1 month ago

In my case, the holder does not click into place, it simply lies loose on the printer. Obviously the dimensions are not right.

athlgrond

•

2 months ago

My pre-assembled unit doesn't "clamp" it just sort of perches atop the printer's frame loosely. Are the parts printed to a looser standard now?