English
1. Tools necessary for this chapter
Step 1 of 82 (Chapter 2 of 4)
Contents
Comments
⬢For this chapter, please prepare:
⬢Needle-nose pliers for mechanical lock add-on only
⬢2.5mm Allen key
Contents
Original Prusa MINI Enclosure (1.0)
- 1. Introduction
- 2. Assembling the Enclosure
- Tools necessary for this chapter
- Base & feet: parts preparation
- Preparing the foot-brackets
- Attaching the anti-vibration pads
- Attaching the foot-brackets
- Mounting the foot-brackets
- Anti-slip dampers: parts preparation
- Preparing the anti-slip dampers
- Mounting the anti-slip dampers
- Profiles: parts preparation
- Installing the profiles
- Top panel: parts preparation
- Fire Suppression System (add-on): parts preparation
- Preparing the Fire suppression system tube (add-on)
- Attaching the Fire suppression system tube (add-on)
- Securing the Fire suppression system tube (add-on): right side
- Securing the Fire suppression system tube (add-on): left side
- Installing the top panel
- Preparing the top window panel
- Mounting the top window panel
- MINI Back panel: parts preparation
- Installing the back panel
- Advanced filtration system (add-on): parts preparation
- Assembling the filtration: parts preparation (add-on)
- Assembling the filtration (add-on)
- Assembling the filtration (add-on)
- Assembling the filtration (add-on)
- Installing the blower (add-on)
- Inserting the HEPA filter (add-on)
- Inserting the HEPA filter (add-on)
- Installing the filtration (add-on)
- Side panels: parts preparation
- Installing the side panel
- Transport handle (optional): parts preparation
- Installing the transport handle (optional)
- Mounting the transport handle (optional)
- White LED strip (add-on): parts preparation
- Assembling the LED strip (add-on)
- Assembling the LED strip (add-on)
- Mounting the LED strip (add-on)
- LED cable: parts preparation (add-on)
- Guiding the LED cable (add-on)
- Guiding the filtration cable: parts preparation (add-on)
- Guiding the add-on cables: filtration cable (add-on)
- USB cable: parts preparation
- Inserting the USB cable
- PSU: parts preparation (add-on)
- Guiding the PSU cable (add-on)
- Releasing the front foot (add-on)
- Securing the PSU cable (add-on)
- Printer PSU preparing
- Inserting the printer PSU cable
- Securing the printer PSU cable
- Basic Board: parts preparation (add-on)
- Installing the Basic Board (add-on)
- Installing the Basic Board (add-on)
- Assembling the Basic Board (add-on)
- Mounting the Basic Board (add-on)
- Connecting the Basic Board (add-on)
- PSU holder clarification (optional)
- PSU holder: parts preparation (optional)
- PSU holder nut preparation (optional)
- PSU holder preparation (optional)
- Attaching the PSU holder (optional)
- Securing the PSUs (optional)
- Door hinges: parts preparation
- Assembling the hinges
- Mounting the hinges
- Mechanical lock (add-on): parts preparation
- Assembling the lock insert (add-on): parts preparation
- Assembling the lock housing (add-on)
- Securing the lock housing (add-on)
- Assembling the lock mechanism (add-on): parts preparation
- Assembling the lock mechanism (add-on)
- Securing the lock mechanism (add-on)
- Installing the door panel (add-on): parts preparation
- Installing the door panel (add-on)
- Door assembly: parts preparation
- Installing the door panel
- Assembling the door handle
- Haribo time!
- Good job!
- 3. Installing the printer
- Manual changelog MINI Enclosure
Comments
Log in to post a comment
Teustach
•
First tell what is the front and the back side of the bottom and top panel.
The bottom is having a hole for the USB, which is only at one side.
The Top is having PRUSA written in it, also only at the one side.
These two sides are the front side.
The bottom is having a hole for the USB, which is only at one side.
The Top is having PRUSA written in it, also only at the one side.
These two sides are the front side.