1. Tools necessary for the next steps

Original Prusa XL Single-Tool (Semi-Assembled) (1.05)

• 1. Introduction
• 2. Base & Side frame assembly
  1. Tools necessary for the next steps
  2. Base frame parts preparation
  3. Extrusion alignment
  4. Right rear extrusion assembly
  5. Securing the right rear extrusion
  6. Left rear extrusion assembly
  7. Z-Axis assembly clarification
  8. Z-Axis fixed assembly
  9. Securing the Z-Axis fixed
  10. Z-Axis rotary assembly
  11. Securing the Z-Axis rotary
  12. Torque indicator: parts preparation
  13. Assembling the Torque indicator
  14. Final tightening with torque indicator
  15. Haribo time!
  16. xLCD: parts preparation
  17. xLCD cable covers: parts preparation
  18. Extrusion covers: parts preparation
  19. Mounting the xLCD
  20. Aligning the xLCD
  21. xLCD assembly versions
  22. Version A: Installing the xLCD PE cable
  23. Version B: Installing the xLCD PE cable
  24. xLCD PE cable management
  25. xLCD cable routing
  26. Routing the cables
  27. Routing the cables
  28. Routing the cables
  29. Horizontal cable inserting
  30. Corner frame cover
  31. Inserting Z-motor-cable-bottom-cover
  32. Preparing the cables for rear cover
  33. Inserting the second motor cable
  34. Inserting Z-motor-cable-bottom-cover
  35. Haribo time!
  36. Well done!
• 3. CoreXY & Back assembly
• 4. Heatbed & Side panels assembly
• 5. Extruder & accessories assembly
• 6. First run
• Manual changelog