1. Tools necessary for the next steps

Original Prusa XL Five-Head (Semi-Assembled) (1.08)

• 1. Introduction
• 2. Base & Side frame assembly
  1. Tools necessary for the next steps
  2. Base frame parts preparation
  3. Extrusion alignment
  4. Right rear extrusion assembly
  5. Securing the right rear extrusion
  6. Left rear extrusion assembly
  7. Z-Axis assembly clarification
  8. Z-Axis fixed assembly
  9. Securing the Z-Axis fixed
  10. Z-Axis rotary assembly
  11. Securing the Z-Axis rotary
  12. Torque indicator: parts preparation
  13. Assembling the Torque indicator
  14. Final tightening with torque indicator
  15. Haribo time!
  16. xLCD: parts preparation
  17. xLCD cable covers: parts preparation
  18. Extrusion covers: parts preparation
  19. Mounting the xLCD
  20. Aligning the xLCD
  21. Installing the xLCD PE cable
  22. xLCD PE cable management
  23. xLCD cable routing
  24. Routing the cables
  25. Routing the cables
  26. Routing the cables
  27. Horizontal cable inserting
  28. Corner frame cover
  29. Inserting Z-motor-cable-bottom-cover
  30. Preparing the cables for rear cover
  31. Inserting the second motor cable
  32. Attaching the frame-rear-cover
  33. Haribo time!
  34. Well done!
• 3. CoreXY & Back assembly
• 4. Heatbed & Side panels assembly
• 5. Tool-changer assembly
• 6. Extruder & accessories assembly
• 7. First run
• Manual changelog Five-Head (Semi-Assembled)