English
Login
3D printers
Materials
Parts & Accessories
Software
3D Models
Applications
Community
Help
Academy
Blog
Company
Support
Original Prusa SL1S SPEED
Original Prusa SL1 to SL1S SPEED upgrade (v1.00)
2. Disassembling the SL1 | Tools necessary for this chapter
1. Tools necessary for this chapter
Step 1 of 18 (Chapter 2 of 7)
Fullscreen mode
Contents
Comments
⬢
For this chapter, please prepare:
⬢
2.0mm Allen key
⬢
2.5mm Allen key
⬢
3.0mm Allen key
⬢
Cutting pliers
for cutting the cable
⬢
Bowl (box) for screws.
Do not throw away any screws
removed in this chapter! Some screws will be reused later on.
Loading...
Next
Contents
Original Prusa SL1 to SL1S SPEED upgrade (v1.00)
1. Introduction
2. Disassembling the SL1
Tools necessary for this chapter
Preparing the printer
Removing the cover
Print display cable holder: New vs old
Disconnecting the print display (NEW)
Disconnecting the print display (OLD)
Removing the print display
Disconnecting the resin sensor cable
Removing the resin sensor
Removing the blower fan assembly
Removing blower
Removing the reflector
Removing the UV LED assembly
Removing the UV LED cable
Disconnecting the PSU
Removing the PSU
Removing the PSU
Dissasembly is finished!
3. Upgrading to SL1S SPEED
4. Firmware upgrading
5. Calibrating the printer
6. First print
7. Manual changelog
Comments
Log in
to post a comment
No comments
