1. Tools necessary for this chapter

Original Prusa XL Single-Tool (Semi-Assembled) (1.05)

• 1. Introduction
• 2. Base & Side frame assembly
• 3. CoreXY & Back assembly
  1. Tools necessary for this chapter
  2. Torque indicator disassembly
  3. Installing the CoreXY assembly: parts preparation
  4. How to insert the M3nEs nuts
  5. CoreXY assembly
  6. Installing the CoreXY assembly
  7. Installing the CoreXY assembly
  8. Securing the CoreXY
  9. Handling the printer
  10. Torque indicator: parts preparation
  11. Assembling the Torque indicator
  12. Securing the CoreXY
  13. Haribo time!
  14. Securing the left linear rail
  15. Securing the right linear rail
  16. Earthing-connectors: parts preparation
  17. Inserting the M3nEs nuts into extrusions
  18. Grounding the Frame
  19. Grounding the sides
  20. Grounding the rear side
  21. Cover-clips: parts preparation
  22. Attaching the cover-clips
  23. Attaching the cover-clips
  24. XL rear panel: parts preparation
  25. Removing the electronics casing
  26. Attaching the XL rear panel
  27. Attaching the XL rear panel
  28. Installing the XL rear panel
  29. Installing the XL rear panel
  30. Haribo time!
  31. Rear left: cable management
  32. Rear left: PE cable
  33. Rear left: connecting the cables
  34. Rear left: securing the cables
  35. Rear right: cable management
  36. Rear right: connecting the cables
  37. Rear right: connecting Wi-Fi Antenna
  38. Installing the frame grounding
  39. Rear right: securing the cables
  40. Overview of electronics wiring
  41. Rear electronics covers preparation
  42. Rear electronics cover
  43. Installing XL buddy box cover
  44. Installing the extrusion covers: parts preparation
  45. Installing front extrusion covers
  46. Instaling rear extrusion covers
  47. Haribo time!
  48. Good job!
• 4. Heatbed & Side panels assembly
• 5. Extruder & accessories assembly
• 6. First run
• Manual changelog