1. Tools necessary for this chapter
Step 1 of 29 (Chapter 3 of 4)
Contents
Comments
⬢For this chapter, please prepare:
⬢TX 10 Torx key / T10 screwdriver
⬢2.5 mm Allen key
⬢3 mm Allen key
⬢Use a cardboard box as a heatbed protection during the setup. Use one of the Nextruder boxes that you received with your printer.
Contents
Prusa XL+ Single-Tool (assembled) (1.00)
- 1. Introduction
- 2. Printer unboxing
- 3. Printer set up
- Tools necessary for this chapter
- Preparing the printer
- Nextruder cable: parts preparation
- Nextruder cable bundle assembly
- Nextruder cable bundle assembly
- Nextruder cable bundle assembly
- Installing the Nextruder: parts preparation
- Installing the Nextruder
- Securing the extruder
- Guiding the extruder cable
- Attaching the Nextruder dock
- Guiding the extruder PTFE tube
- Wi-Fi antenna holder: parts preparation
- Installing the Wi-Fi antenna: antenna preparing
- Installing the Wi-Fi antenna: antenna preparing
- Connecting the extruder cable
- Installing the Wi-Fi antena holder
- XL buddy box covering
- Installing the Wi-Fi antenna: parts preparation
- Installing the Wi-Fi antenna
- Universal spool holder: parts preparation
- Adjusting the spool holder nut
- Mounting the puck-universal
- Installing the spoolholder
- xLCD: parts preparation
- Connecting the xLCD cables
- Mounting the xLCD
- Reward yourself
- Almost done!
- 4. First run
Comments
Log in to post a comment
No comments