English
1. Tools necessary for this chapter
Step 1 of 50 (Chapter 3 of 5)
Contents
Comments
⬢For this chapter, please prepare:
⬢T10 Torx key
⬢2.5 mm Allen key
⬢4.0 mm Allen key
⬢A cardboard box is to be used as heatbed protection during the setup. Hint: you can use the Nextruder box shipped with your printer.
Contents
Original Prusa XL Dual-Head (Assembled) (1.07)
- 1. Introduction
- 2. Printer unboxing
- 3. Printer set up
- Tools necessary for this chapter
- Injection molded xLCD: parts preparation
- Injection molded xLCD: xLCD cables
- Injection molded xLCD: mounting the xLCD
- xLCD: parts preparation
- Older xLCD assembly versions
- Version A: Mounting the xLCD
- Version B: mounting the xLCD
- Mounting the xLCD
- Preparing the printer
- Nextruder assembly: parts preparation
- Nozzle seal versions
- Version C: Nextruder dock preparing
- Guiding the Nextruder cable
- Attaching the first and second nextruder dock
- Dock inspection
- Dock inspection: video
- Version C: Nozzle seal: parts preparation
- Version C: Assembling the Nozzle seal
- Version C: Nextruder nozzle seal
- Guiding the Nextruder PTFE tube
- Wi-fi antenna holder versions
- Version A: Connecting the Nextruder cables
- Version A: Installing the Wi-Fi antenna: parts preparation
- Version A: Installing the Wi-Fi antenna
- Version B: Connecting the Nextruder cables
- Version B: Wi-Fi antenna holder: parts preparation
- Version B: Installing the Wi-Fi antenna: antenna preparing
- Version B: Installing the Wi-Fi antenna: antenna preparing
- Version B: Installing the Wi-Fi antena holder
- Version B: XL buddy box covering
- Version B: Installing the Wi-Fi antenna: parts preparation
- Version B: Installing the Wi-Fi antenna
- Spoolholder assembly versions
- Version A: Assembling the spool holder: parts preparation
- Version A: Assembling the spool holder: adjusting the nut
- Version A: Assembling the spool holder
- Version A: Mounting the spool holder assembly
- Version B: Assembling the spool holder: parts preparation
- Version B: Assembling the spool holder: adjusting the nut
- Version B: Assembling the spool holder
- Version B: Preparing the spool holder
- Version B: Mounting the spool holder assembly
- Nextruder assembly: parts preparation
- Docking the Nextruder
- Nextruder cable bundle assembly
- Nextruder cable bundle assembly versions
- Version A: Nextruder cable bundle assembly
- Version B: Nextruder cable bundle assembly
- Almost done!
- 4. First run
- Manual changelog XL Dual-Head (Assembled)