1. Tools necessary for this chapter

Original Prusa i3 MK3 kit assembly

• 1. Introduction
• Introduction
• 2. Y-axis assembly
• 3. X-axis assembly
  1. Tools necessary for this chapter
  2. X-axis: x-end idler and motor holder
  3. X-axis: inserting linear bearings
  4. X-end-motor: tensioner assembly
  5. X-end-idler: bearing assembly
  6. X-axis: smooth rods preassembly
  7. X-axis: assembly
  8. Assembling the X-axis motor pulley (part 1)
  9. Assembling the X-axis motor pulley (part 2)
  10. X-axis: assembling the motor
  11. X-carriage preparation
  12. X-carriage: assembly
  13. X-axis is finished!
• 4. Z-axis assembly
• 5. E-axis assembly (spiral wrap)
• 5. E-axis assembly (textile sleeve)
• 6. LCD assembly
• 7. Heatbed & PSU assembly (spiral wrap)
• 7. Heatbed & PSU assembly (textile sleeve)
• 8. Electronics assembly (B3/R2 design)
• 8. Electronics assembly (B7/R3 design)
• 9. Preflight check
• Manual changelog