English
1. Tools necessary for this chapter
Step 1 of 29 (Chapter 4 of 7)
Contents
Comments
⬢For the next steps, please prepare:
⬢Needle-nose pliers (1x)
⬢Philips (PH2) screwdriver (1x)
⬢T10 Torx key / screwdriwer
⬢2.5 mm Allen key
⬢3.0 mm Allen key
Contents
Original Prusa XL Dual-Head to Five-Head Upgrade (1.01)
- 1. Introduction
- 2. Printer preparing
- 3. Detaching the Nextruder
- 4. PSU & electronics assembly
- Tools necessary for this chapter
- Back antenna disconnecting
- Back antenna disassembly
- Back covers disassembly
- PSU assembly: parts preparation
- PSU assembly: PSU preparing
- PSU assembly: PSU preparing
- PSU assembly: printer preparing
- Attaching the PSU
- Securing the PSU
- PSU covers: parts preparations
- PSU covers: side cover
- PSU covers: lower cover
- PSU power cable cover: parts preparation
- PSU power cable cover: lower cover
- PSU power cable cover: power cable
- PSU power cable cover: middle cover
- PSU power cable cover: upper cover
- XL-splitter: parts preparation
- Installing the XL_splitter
- Filament sensor cable: parts preparation
- Filament sensor cable: connecting the cable
- Metal plate cable covers: parts preparations
- Adjusting the XL-buddy-box-cover
- Lower metal plate cable covers
- Upper metal plate cable covers
- XL buddy cover
- Reward yourself!
- Well done!
- 5. Nextruder & accessories assembly
- 6. First run
- Manual changelog XL (Dual-Head to Five-Head upgrade)