1. Tools necessary for this chapter

Original Prusa MINI+ kit assembly (v1.09)

• 1. Introduction
• 2. YZ - axis assembly
• 3. X-axis & Extruder assembly
• 4. Print head & Heatbed assembly
• 5. LCD assembly & Electronics
  1. Tools necessary for this chapter
  2. LCD assembly: parts preparation
  3. Mounting the LCD
  4. Connecting the LCD
  5. LCD cable guidance
  6. LCD assembly: reward yourself!
  7. Optional: ESP Wi-Fi Module
  8. Power switch: parts preparation
  9. Mounting the power switch
  10. Connecting the power switch
  11. Filament sensor: parts preparation (optional)
  12. Filament sensor: parts preparation (optional)
  13. Filament sensor assembling (optional)
  14. Filament sensor assembling (optional)
  15. Filament sensor assembling (optional)
  16. Filament sensor assembling (optional)
  17. Filament sensor installation (optional)
  18. Connecting the filament sensor (optional)
  19. Connecting the electronics
  20. Connecting the electronics
  21. Covering the electronics: parts preparation
  22. Covering the electronics
  23. Gluing the silver label
  24. Electronics: reward yourself!
  25. LCD assembly & Electronics are finished!
  26. New vs old Spool holder assembly
• 6A. Spool holder assembly
• 6B. Spool holder assembly
• 7. Preflight check
• Manual changelog MINI+ kit