1. Tools necessary for this chapter

Original Prusa i3 MK3S/MK3S+ to MK3.5S upgrade (1.0)

• 1. Introduction
• 2. Parts check
• 3. Printer dissasembly
• 4. xBuddy assembly
• 5. xLCD & PSU assembly
• 6. Heatbed upgrade
  1. Tools necessary for this chapter
  2. Removing the heatbed thermistor
  3. New heatbed thermistor: parts preparation
  4. Preparing the heatbed and thermistor
  5. Covering the thermistor
  6. Fixing the thermistor in place
  7. Heatbed cable assembly: parts preparation
  8. Heatbed cable assembly (part 1)
  9. Heatbed cable assembly (part 2)
  10. Heatbed cable assembly (part 3)
  11. Covering the heatbed cables: parts preparation
  12. Assembling the heatbed-cable-cover-bottom
  13. Assembling the heatbed-cable-cover: nylon filament
  14. Assembling the heatbed-cable-cover-bottom
  15. Assembling the heatbed-cable-cover-top
  16. Wraping the textile sleeve
  17. Installing the Expansion joints: parts preparation
  18. Preparing the expansion joints
  19. Installing the Expansion joints
  20. Attaching the heatbed: parts preparation
  21. Attaching the heatbed
  22. Tightening the heatbed
  23. Guiding the heatbed cables: parts preparation
  24. Assembling the Wi-Fi
  25. Guiding the heatbed cables
  26. Installing the WiFi cover assembly
  27. Reward yourself!
  28. Almost there
• 7. Extruder & connectivity upgrade
• 8. Preflight check
• Manual changelog MK3.5S upgrade