1. Tool necessary for this chapter

Prusa CORE One kit assembly (1.00)

• 1. Introduction
• 2. Base assembly
• 3. Back assembly
• 4. Heatbed assembly
• 5. CoreXY assembly
• 6. Nextruder assembly
  1. Tool necessary for this chapter
  2. Nextruder idler assembly: parts preparation
  3. Assembling the extruder idler
  4. Assembling the extruder: parts preparation I.
  5. Assembling the extruder: parts preparation II.
  6. Assembling the extruder
  7. Assembling the gearbox
  8. Assembling the PG-ring
  9. Assembling the PG-assembly
  10. Checking the PG-assembly
  11. Assembling the Nextruder idler
  12. Gear lubrication: parts preparation
  13. Lubricating the gear
  14. Covering the planetary gear
  15. Assembling the Idler-swivel: parts preparation
  16. Assembling the Idler-swivel
  17. Assembling the Idler-nut
  18. Mounting the Idler-swivel assembly
  19. NTC thermistor: parts preparation
  20. Assembling the NTC thermistor
  21. Mounting the Nextruder: parts preparation
  22. Protecting the heatbed
  23. Mounting the Nextruder
  24. Hotend fan: parts preparation
  25. Installing the Hotend fan
  26. Guiding the Hotend fan cables
  27. LoveBoard: parts preparation I.
  28. LoveBoard: parts preparation II.
  29. Assembling the Loveboard-mount
  30. Assembling the Printhead-cover
  31. Assembling the LoveBoard
  32. Guiding the main cable
  33. Covering the LoveBoard
  34. Swingarm: parts preparation I.
  35. Swingarm: parts preparation II.
  36. Guiding the main cable
  37. Mounting the main cable
  38. Attaching the LoveBoard assembly
  39. Mounting the swingarm
  40. Attaching the main cable
  41. Inserting the PTFE tube
  42. Securing the PTFE tube
  43. Checking the movement
  44. Print fan: parts preparation
  45. Assembling the fan-shroud
  46. Installing the print fan assembly
  47. Hotend: parts preparation
  48. Installing the hotend
  49. Connecting the heatsink cables
  50. Connecting the hotend cables
  51. Connecting the print fan cable
  52. Connect E-motor cable
  53. LoveBoard covers: parts preparation
  54. LoveBoard: Wiring check
  55. Covering the LoveBoard
  56. Guiding the main cable
  57. Haribo time
  58. Done
• 7. Bodywork & Electronics
• 8. Trim, Door & xLCD
• 9. Calibration & First run
• Manual changelog