English
Login
3D printers
Materials
Parts & Accessories
Software
3D Models
Applications
Community
Help
Academy
Blog
Company
Support
Original Prusa MK4S
Original Prusa MK4S kit assembly (1.01)
7. Y-carriage & Heatbed assembly | Tools necessary for this chapter
1. Tools necessary for this chapter
Step 1 of 58 (Chapter 7 of 9)
Fullscreen mode
Contents
Comments
⬢
For this chapter, please prepare:
⬢
1.5mm Allen key
⬢
2.0 mm Allen key
⬢
2.5mm Allen key
⬢
Torx T8/10 key
⬢
Needle-nose pliers
⬢
Phillips screwdriver PH2
⬢
Universal wrench
Loading...
Next
Contents
Original Prusa MK4S kit assembly (1.01)
1. Introduction
2. Frame assembly
3. X-axis & X-carriage assembly
4. Z-axis assembly
5. Nextruder assembly
6. xLCD assembly
7. Y-carriage & Heatbed assembly
Tools necessary for this chapter
Heatbed cable assembly: parts preparation
Heatbed cable assembly (part 1)
Heatbed cable assembly (part 2)
Heatbed cable assembly (part 3)
Covering the heatbed cables: parts preparation
Assembling the heatbed-cable-cover-bottom
Assembling the heatbed-cable-cover: nylon filament
Assembling the heatbed-cable-cover-bottom
Assembling the heatbed-cable-cover-top
Wraping the textile sleeve
Y-carriage: parts preparation
Assembling the bearing clips
Installing the bearing on the Y-carriage
Aligning the bearing
Installing the bearings on the Y-carriage
Positioning of the bearings
Y-axis: smooth rods holders
Inserting smooth rods into Y-carriage
Preparing Y-rod-holder
Mounting the Y-rod-holder parts
Installing the Y-carriage
Aligning the smooth rods
Assembling the Y belt: parts preparation
Assembling the Y-belt-holder
Assembling the Y belt
Attaching the Y belt holder
Assembling the Y belt tensioner
Attaching the Y belt tensioner
Tensioning the Y belt
Belt tension check
Aligning the Y belt
Installing the Expansion joints: parts preparation
Preparing the expansion joints
Installing the Expansion joints
Attaching the heatbed: parts preparation
Attaching the heatbed
Tightening the heatbed
Guiding the heatbed cables: parts preparation
Assembling the Wi-Fi
Guiding the heatbed cables
Installing the WiFi cover assembly
NFC antenna: parts preparation I.
NFC antenna: parts preparation II.
Installing the NFCcoil (pre-assembled)
Connecting the NFC antenna
Preparing the NFCcoil
Assembling the NFC antenna
Verify all connections once more!
Covering the xBuddy box: bottom cover
Covering the xBuddy box
Assembling the double spool holder (part 1)
Assembling the double spool holder (part 2)
Assembling the Filament guide: parts preparation
Filament guide assembly (part 1)
Filament guide assembly (part 2)
Haribo time!
That's it
8. Preflight check
Manual changelog
Comments
Log in
to post a comment
synacktic
•
2 months ago
I am disapointed that one allen key got left out. Is there really nothing for the 3.0mm to do in this chapter?
Reply
Jan Kratochvíl
•
2 months ago
Sorry... You can check if your frame is tightened correctly.
Reply
