1. Tools necessary for this chapter

MMU3 Assembly (MK3S+, MK3.5, MK3.9/S, MK4/S, CORE)

• 1. Introduction
• 2. MMU2S Disassembly (UPG)
• 3. MMU2S Buffer Disassembly (UPG)
• 4. Idler Body Assembly
• 5. Selector Assembly
• 6. Pulley Body Assembly
• 7. Spool holder Assembly
• 8A. Cassette Buffer Assembly
  1. Tools necessary for this chapter
  2. Parts preparation
  3. Peeling the plates
  4. Assembly (part 1)
  5. Assembly (part 2)
  6. Assembly (part 3)
  7. Assembly (part 4)
  8. Assembly (part 5)
  9. Parts preparation: Plate-holders
  10. Assembly (part 6)
  11. Buffer segment parts preparation
  12. Buffer cartridge INFO
  13. Segment assembly (part 1)
  14. Segment assembly (part 2)
  15. Segment assembly (part 3)
  16. Collets: parts preparation
  17. Collet installation
  18. Cartridge installation
  19. PTFE tubes parts preparation
  20. PTFE tubes installation
  21. Continue
• 8B. CORE One Buffer Assembly
• 9A. MK4/S, MK3.9/S Nextruder mod
• 9B. MK3S+ / MK3.5 Extruder mod (KIT)
• 9C. MK3S+ Extruder (UPG)
• 9D. CORE One Nextruder mod
• 10A. MK4/S, MK3.9/S Setup and Calibration
• 10B. MK3S+ Setup and Calibration
• 10C. MK3.5 Setup and Calibration
• 10D. CORE One Setup and Calibration
• 11. First Flight