ファームウェアとダウンロード
PrusaSlicer 2.9.0
2024-12-20T00:00:00+00:00
変更 2.9.0
- Multiple beds and bulk export
- Scarf seams
- Printables integration
- Paint-on fuzzy skin
- Improvements in painting tools and multi-material slicing
- Basic support for printing with different nozzle diameters
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Firmware 6.2.1 (3.0.3) MK4S, MK4, MK3.9S, MK3.9
2025-02-20T00:00:00+00:00
変更 6.2.1 (3.0.3) MK4S, MK4, MK3.9S, MK3.9
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.04
2024-02-22T00:00:00+00:00
変更 1.04
- Update on the change from 0.6 mm nozzle diameter to 0.4 mm as default.
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.11
2023-11-10T00:00:00+00:00
変更 1.11
- Wi-Fi auto-reconnect fixed
- Improved Wi-Fi (ESP) flashing
- RTC fixed
- Additional hotend protection
- UI fixes
- New error code URL
- Improved bootstrap
- Known issues
Firmware 1.2.4
2024-12-09T00:00:00+00:00
変更 1.2.4
- Added statistics panel to Klipper Screen
- Panel thermistors reading fixed
- Temperature min-max splitted to settable min-max and failure min-max
- Filament sensor interlock locking fixed - Print can't be now started without filament present.
- Long gcode names UI buttons breaking on preprint screen fixed
- Nozzle purge after printhead change offers incompatible material fixed
- Move printhead to the front on filament change wizard
- Always reheat on flex unload
- M109 and M190 not working on pause fixed
- Speed and extrusion factor reset on start of new print
- HT materials loading temperature fixed
- Print temperatures in time of ADC out of range event
- Display correct verb on temperature waiting
- Splash screen printhead image updated from AQI to HT90
- Turbine hysteresis added
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.01
2024-10-23T00:00:00+00:00
変更 1.01
Correction of product information
Minor content updates
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 1.7.2
2024-03-19T00:00:00+00:00
変更 1.7.2
- Project thumbnail page while printing
- Elephant foot and exposure times compensation fix
- Help pages split between M1 and SL1/S
- Red screen (error page) with a scrollable layout
- Bug fixes
- Known issues
Firmware 3.3.0
2023-05-16T00:00:00+00:00
変更 3.3.0
- Extend all timers to 255 minutes
- IPA Filtering (new feature)
- Wash cycles (new feature)
- New heating algorithm
- Automatic fans control
- Factory reset option
- Improved self-test
- Bugfixes
Firmware 3.14.1 (3.0.3)
2024-11-28T00:00:00+00:00
変更 3.14.1 (3.0.3)
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 6.2.1
2025-02-20T00:00:00+00:00
変更 6.2.1
- 'Not HF Nozzle' status reset post-update
- Recalibration of X and Y Axes after reset
- Support for M30 G-code
Handbook 1.11
2023-11-10T00:00:00+00:00
変更 1.11
- Wi-Fi auto-reconnect fixed
- Improved Wi-Fi (ESP) flashing
- RTC fixed
- Additional hotend protection
- UI fixes
- New error code URL
- Improved bootstrap
- Known issues
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Handbook 2.62
2020-06-12T00:00:00+00:00
変更 2.62
Reflects changes introduced in FW 3.9.0:
- First layer calibration chapter updated
- Linear Advance chapter updated
- Display brightness chapter added
- LCD menu structure updated
- MINTEMP information updated
Firmware 1.7.2
2024-03-19T00:00:00+00:00
変更 1.7.2
- Project thumbnail page while printing
- Elephant foot and exposure times compensation fix
- Help pages split between M1 and SL1/S
- Red screen (error page) with a scrollable layout
- Bug fixes
- Known issues
Handbook 1.05
2020-06-12T00:00:00+00:00
変更 1.05
- Added information reflecting changes in firmware 1.4.0
- Added instructions on print display replacement and UV LED panel calibration
- Updated firmware update information
Firmware 3.3.0
2023-05-16T00:00:00+00:00
変更 3.3.0
- Extend all timers to 255 minutes
- IPA Filtering (new feature)
- Wash cycles (new feature)
- New heating algorithm
- Automatic fans control
- Factory reset option
- Improved self-test
- Bugfixes
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Handbook 3.04
2018-09-12T00:00:00+00:00
変更 3.04
- Loading filament (updated chapter)
- LCD screen (updated chapter)
- Beeper settings (new chapter)
- Language settings (new chapter)
- MMU 2.0 (new chapter)
- Slic3r PE (updated chapter)
- Filament sensor (updated chapter)
- Updating firmware (updated chapter)
- Linearity correction (new chapter)
Firmware 3.14.1
2024-11-28T00:00:00+00:00
変更 3.14.1
- Add filament presence check at start of print
- Region Mesh Bed Levelling fixes
- Show filament color/name during M600
- Fix safety timer not handled correctly
- Delay Z-Axis on Autoload
- Replace hard coded crash z lift value with Pause Z lift value.
- Send host actions on filament runout
- Lower MIN_Z_FOR_UNLOAD from 50mm to 20mm
- Add "load filament" if autoload is disabled
- Abort nozzle change if filament is loaded
- PowerPanic related changes
- Reduce ambient shutdown to 80 °C
- Added
utils/build.pyto be able to compile the firmware - MMU related changes
- Minor fixes
- Community related changes
Firmware 3.2.3
2019-06-06T00:00:00+00:00
変更 3.2.3
- Preheat error improved
- Improved temperature regulation
- Remaining time estimation
- Adjustable beeper notifications
- Incomplete file check updated
- G-code fixes (M27, M110, M115)
Firmware 3.2.3
2019-06-06T00:00:00+00:00
変更 3.2.3
- Preheat error improved
- Improved temperature regulation
- Remaining time estimation
- Adjustable beeper notifications
- Incomplete file check updated
- G-code fixes (M27, M110, M115)
Firmware 3.0.12
2017-06-23T00:00:00+00:00
変更 3.0.12
- Improved XYZ calibration
- XYZ calibration results are now available in Support menu
- Selftest fixed
- Improved unload filament
- Multi Material
- When stopping a print, user is asked what filaments to unload
- “T?” Gcode added, which selects extruder to use prior to the print
- Added support for MK1
