What happened?

The printer displaying the message: The printer is not UV calibrated, please connect the UV calibrator and run the procedure.

Error name: P<span data-sheets-value="{"1":2,"2":"The printer is not UV calibrated, please connect the UV calibrator and run the procedure."}" data-sheets-userformat="{"2":513,"3":{"1":0},"12":0}">rinter is not UV calibrated

Error code: #10308

How to fix it?

When replacing the print display or A64 logic board, you must calibrate the UV LEDs using the calibrator. This error can also occur if the calibration process failed or was aborted. The calibration process is part of the replacement guide.

How to replace faulty parts

How to replace the print display (SL1)

How to replace the A64 board (SL1)