Selftest (SL1)
Relevant for
SL1
Article is also available in following languages
Relevant for
When first turning on your SL1 printer, or after a factory reset, the printer will ask to start the selftest. You can also start the Selftest in the printer menu in Settings -> Calibration -> Wizard. The selftest checks the most important functions of the printer.
The tank home check will start the selftest by checking the tilt for movement and if it can find the homing position. Any error in this process can generate the following message:
The tower is also checked for the range of movement and home position. Any error in this process can generate the following messages:
After the mechanical checks for the tank and the tower, the printer will ask you to unscrew and remove the tank and the print platform. The UV LED will be checked.
The SL1 has multiple fans. They are checked during the selftest, and if one of them has something blocking it, is not well connected, or has damage, the following errors can be presented, and in case this happens, the fan will be identified in the message:
The printer will ask if you can see the Prusa sign from the top of the orange cover. Do not open the orange cover, there is a UV light inside, which will cause damage to your eyes. In case you click that you cannot see the logo, you will see the following message:
This step will check the tower axis for its full range of motion. In case there is an issue, one of the following messages might appear:
After inserting the print platform at 60º, the resin sensor will be checked. In case the sensor is not found, the following error will be shown:
At this step, you can set the timezone for your printer. The step is optional.
The printer will play a sound, and if you click that you cannot hear it, the following message will appear: