⬢Please watch our video with the most common build problems and their solutions before printing. [http://www.prusa3d.com/buildvideoMK2]
FR
Se Connecter- English
- Home
- MK2S
- Manuels d'assemblage
- Assemblage du kit Original Prusa i3 MK2
- 9. Preflight check
9. Preflight check
Menu
- Assemblage du kit Original Prusa i3 MK2
- 1. Introduction
- 2. Y-axis assembly
- 3. X-axis assembly
- 4. Z-axis assembly
- 5. Extruder Assembly
- 6. LCD assembly
- 7. PSU & Heatbed assembly
- 8. Electronics assembly
- 9. Preflight check
- 1. Check your Prusa i3 before printing
- 2. Quick guide for your first prints
- 3. Printable 3D models
- 4. Prusa knowledge base
- 5. Prusa3D forum
9. Preflight check
Pertinent pour:
Dernière mise à jour 5 years ago Difficulté
Modéré Étapes
5 Langues disponibles
See our free 3D Printing Handbook - http://www.prusa3d.com/3dhandbookMK2
⬢Read the chapters 3.2 Disclaimer and 3.3 Safety instructions
⬢Read the chapter 6.3 Setup before printing.
⬢Download and install the drivers - chapter 8 Printer drivers. Don't forget we have ready to print settings for Slic3r, Cura, Simplify3D and KISSlicer.
Calibrate the printer by following the chapter 6.3.1 Calibration flow. Please follow the steps exactly, otherwise you can permanently damage the print surface!
⬢Read the chapter 7 Printing of 3D Printing Handbook.
⬢Congratulations! You should be ready to print by now ;-)
⬢You can start by printing some of our test objects bundled on the included SD card - you can check them out here prusa3d.com/printable-3d-models
⬢If you encounter any problems at all, don't forget you can always check out our knowledge base at http://help.prusa3d.com. We're adding new topics every day!
⬢If you need help with the build, check out our forum with great community :-)
⬢Account is shared with http://shop.prusa3d.com/
Support forum is available at http://forum.prusa3d.com
Ce guide vous a-t-il été utile ?
Commentaires
Vous avez encore des questions ?
Si vous avez une question sur un sujet qui n'est pas traité ici, consultez nos ressources supplémentaires.
Et si cela ne suffit pas, vous pouvez envoyer une demande à [email protected] ou via le bouton ci-dessous.