1. Tools necessary for this chapter

Bondtech INDX Conversion kit for the Prusa CORE One/+ (Founders Edition)

• 1. Introduction & preparation
• 2. Printer disassembly
• 3. Z-axis upgrade
• 4. INDX Toolhead & Side filament sensors
• 5. Spool holders & Tool dock assembly
  1. Tools necessary for this chapter
  2. Side handle: parts preparation
  3. Installing the side handle
  4. Dock fan cable: parts preparation
  5. Dock fan head cable
  6. Securing the zip ties I.
  7. Securing the zip ties II.
  8. Attaching the dock fan cable
  9. Leading the dock fan cable I.
  10. Leading the dock fan cable II.
  11. Securing the dock fan cable
  12. Tightening the zip ties I.
  13. Tightening the zip ties II.
  14. Nozzle cleaner: parts preparation I.
  15. Nozzle cleaner: parts preparation II.
  16. Assembling the Wiper-lock
  17. Securing the Wiper-lock
  18. Installing the Wiper-adjuster
  19. Inserting the wiper blocks
  20. Installing the nozzle cleaner
  21. Electronics covers: parts preparation
  22. Securing the cables
  23. Wiring check
  24. Covering the xBuddy box
  25. Installing the rear cover
  26. Bottom puck holders: parts preparation
  27. Assembling the bottom puck holders
  28. Removing the screws - right
  29. Mounting the bottom puck holders - right
  30. Securing the front Puck-holder bottom - right I.
  31. Securing the front Puck-holder bottom - right II.
  32. Securing the rear Puck-holder bottom - right I.
  33. Securing the rear Puck-holder bottom - right II.
  34. Removing the screws - left
  35. Mounting the bottom puck holders - left
  36. Securing the front Puck-holder bottom - left I.
  37. Securing the front Puck-holder bottom - left II.
  38. Securing the rear Puck-holder bottom - left I.
  39. Securing the rear Puck-holder bottom - left II.
  40. Tilting the printer
  41. Finishing the rear puck holder bottom - left I.
  42. Finishing the rear puck holder bottom - left II.
  43. Finishing the front puck holder bottom - left I.
  44. Finishing the front puck holder bottom - left II.
  45. Finishing the rear puck holder bottom - right I.
  46. Finishing the rear puck holder bottom - right II.
  47. Finishing the front puck holder bottom - right I.
  48. Finishing the front puck holder bottom - right II.
  49. Top puck holders: parts preparation
  50. Assembling the puck holder top
  51. Removing the nylon rivets - right
  52. Mounting the front puck holder top - right
  53. Securing the front puck holder top - right
  54. Mounting the rear puck holder top - right
  55. Securing the rear puck holder top - right
  56. Removing the nylon rivets - left
  57. Mounting the front puck holder top - left
  58. Securing the front puck holder top - left
  59. Mounting the rear puck holder top - left
  60. Securing the rear puck holder top - left
  61. Dock fan: parts preparation
  62. Assembling the dock fan
  63. Attaching the FunFan board
  64. Attaching the dock fan
  65. Securing the dock fan
  66. Haribo time!
  67. Tool holder: parts preparation
  68. Assembling the tool holder
  69. Installing the tool holders
  70. Nozzle seal holder: parts preparation
  71. Assembling the nozzle seal
  72. Assembling the Nozzle-seal-holder
  73. Installing the nozzle parking plates
  74. Ventilation lever: parts preparation
  75. Assembling the ventilation lever
  76. Top cover: parts preparation I.
  77. Top cover: parts preparation II.
  78. Attaching the hinge covers
  79. Attaching the grill
  80. Attaching the left cover lock
  81. Attaching the right cover lock
  82. Top cover back: parts preparation
  83. Attaching the top cover back
  84. Attaching the hinge base - left
  85. Attaching the hinge base - right
  86. Attaching the top cover I.
  87. Attaching the top cover II.
  88. INDX Nozzle tool: parts preparation
  89. Attaching the tooldock
  90. Securing the tooldock
  91. Attaching the LED panel
  92. Optional: Installing the Buddy3D Camera
  93. Connecting the INDX Nozzle tools (positions 1–4)
  94. Docking the tools (positions 1–4)
  95. Connecting the INDX Nozzle tools (positions 5–8)
  96. Docking the tools (positions 5–8)
  97. Checking the tubes
  98. Offset sensor cover: parts preparation
  99. Covering the offset sensor
  100. Door panel: parts preparation
  101. Mounting the door panel
  102. Haribo time !
  103. That's it
• 6. Preflight check