Prusa CORE One/+ INDX | Prusa Knowledge Base

Bondtech INDX Upgrade for the Prusa CORE One+ (Founders Edition)

4. INDX Toolhead & Side filament sensors

Bondtech INDX Conversion kit for the Prusa CORE One/+ (Founders Edition)

6 chapters

Moderate

Begin assembly

Getting started with CORE One+ INDX

First print with PrusaSlicer

If you are using PrusaSlicer for the first time to generate a gcode or bgcode for printing, you can follow the steps below. Click on the links to get more information about the…

Prusa Connect and PrusaLink explained

Prusa Connect and PrusaLink are two remote printing solutions developed in-house by Prusa. Its origin is in the management system used in our record-sized print farm located in…

How to update firmware (CORE One L, CORE One, MK4/S, MK3.9/S, MK3.5/S, XL)

On the Prusa CORE One L, Prusa CORE One/+, Original Prusa MK4/S, MK3.9/S, MK3.5/S, and XL, the firmware is flashed using a USB flash drive. This is valid for all ways of firmware…

Fix common issues

First print troubleshooting (CORE One INDX)

When you finish building the INDX conversion kit, your CORE One+ becomes the CORE One+ INDX. You switch on the printer for the first time and run all the calibrations. They are…

QR Error codes

This is an advanced system for displaying error screens, providing more useful information to the user. In case of an issue, the printer will display the name of the error followed…