English

1. Begin assembly

Step 1 of 22 (Chapter 1 of 9)

Contents

Comments

PrusaLink / Prusa Connect with RPi 3/4 USB (MK2.5/S MK3/S/+)

Difficulty
Moderate
Available languages

Prusa Connect & PrusaLink

PrusaLink / Prusa Connect with RPi 3/4 USB (MK2.5/S MK3/S/+)
Prusa Connect - Telegram notifications setup
How to update PrusaLink (MK2.5/S MK3/S/+)
Camera setup for PrusaLink / Prusa Connect
Prusa Connect - Discord notifications setup
Prusa Connect - Slack notifications setup
Sending files from PrusaSlicer to PrusaLink
Printing on MK3/S/+ via PrusaLink
ESP Camera for Prusa Connect

Comments

Xjman349

•

over 1 year ago

Am I able to setup two printers on one RP4?

David B.

•

over 1 year ago

Hi! Multi-instance operation is already available in the current RC version of Prusalink:
https://github.com/prusa3d/Prusa-Link/releases

GerryPB

•

over 1 year ago

Instructions say, "connect it to your MK2.5/2...", but it wont work with MK2 or MK2S. Mk2 will only go to 3.2.3 firmware but 3.10.1 is needed. I confirmed this with Prusa tech support.

David B.

•

over 1 year ago

Thanks for the notice. Updated.

1. Begin assembly

Difficulty

Available languages

Contents

Prusa Connect & PrusaLink

Comments

1. Begin assembly

Difficulty

Available languages

Contents

Prusa Connect & PrusaLink

Comments