1. Begin assembly

Prusa Connect & PrusaLink

• PrusaLink and Prusa Connect setup (MK3/S/+)
• Installing Wi-Fi and PrusaLink (MINI/+)
• Wi-Fi and Prusa Connect/Link setup (CORE One, MK4/S, MK3.9, MK3.5, XL, MINI/+)
• Adding the printer to Prusa Connect (CORE One, MK4/S, MK3.9/S, MK3.5/S, XL, MINI/+)
• Wi-Fi and PrusaLink setup (XL firmware up to 4.7.5)
• Adding the printer to Prusa Connect (XL firmware up to 4.7.5)
• PrusaLink / Prusa Connect with RPi 3/4 USB (MK2.5/S MK3/S/+)
  1. Begin assembly
  2. Introduction
  3. Parts preparation: Raspberry Pi
  4. RPi Imager Download
  5. Preparing necessary software
  6. Setting up the SD card in Pi Imager
  7. Setting up the SD card in Pi Imager 2
  8. Inserting the SD card
  9. Connecting the RPi to the printer
  10. Powering up the Raspberry Pi
  11. Setting the printer up
  12. Setting the printer up
  13. Prusa Connect Log in
  14. Opening up PrusaLink Wizard
  15. PrusaLink Wizard - Credentials
  16. PrusaLink Wizard - Printer Info
  17. PrusaLink Wizard - Recap
  18. Adding the printer into Prusa Connect
  19. Printing a file from PrusaLink
  20. Printing a file from PrusaLink
  21. Printing a file from Prusa Connect
  22. Prusa Connect file management
  23. You are set!
• Camera setup for PrusaLink / Prusa Connect
• Prusa Connect - Telegram notifications setup
• Prusa Connect - Discord notifications setup
• Prusa Connect - Slack notifications setup
• How to update PrusaLink (MK2.5/S MK3/S/+)
• Sending files from PrusaSlicer to PrusaLink
• Printing on MK3/S/+ via PrusaLink
• ESP Camera for Prusa Connect