Italiano
Login
Stampanti 3D
Materiali
Componenti e accessori
Software
Modelli 3D
Campi d'applicazione
Community
Aiuto
Academy
Blog
Azienda
Supporto
Original Prusa i3 Plus 1.75 mm
Kit da assemblare Original Prusa i3 Plus 1.75 mm
First print i3 Plus LCD/SD | Plug in the printer
1. Plug in the printer
Step 1 of 7 (Chapter 3 of 3)
Modalità schermo intero
Contenuti
Commenti
⬢
Plug-in the printer. If display is on, everything is fine ;-)
⬢
Notice the squished filament line around the PRUSA logo. This is the right amount of compression for the first layer.
⬢
Calibrate your printer.
⬢
Prepare the printbed.
Loading...
Successivo
Contenuti
Kit da assemblare Original Prusa i3 Plus 1.75 mm
Calibrate i3 Plus LCD/SD
Introduction
First print i3 Plus LCD/SD [Traduzione in corso]
Plug in the printer
Spool holder
Preheat the printer
Filament change
Clean the nozzle
Start the print
Check the first layer
Commenti
Accedi
per inviare un commento
Nessun commento
