EN
Login- Čeština
- Italiano
- Deutsch
- Polski
- Français
- Home
- Using the printer
- Prusa Connect & PrusaLink
- Prusa Connect (HT90)
Prusa Connect (HT90)
Menu
- 3D models
- Material guide
- Slicing
- Printer maintenance
- Prusa Connect & PrusaLink
- Buddy3D Camera
- Camera compatibility (RPi + PrusaLink)
- Connect Registration Failed
- Connect Registration Failed #12401 (MINI)
- Connect Registration Failed #17401 (XL)
- Connect Registration Failed #21401 (MK3.9)
- Connect Registration Failed #23401 (MK3.5)
- Connect Registration Failed #26401 (MK4S) #13401 (MK4)
- Connecting Original Prusa SL1/SL1S to PrusaSlicer
- How to connect to RPi via SSH
- How to set a Static IP Address
- Prusa Connect - Camera API
- Prusa Connect (HT90)
- Connecting
- Prusa Connect and PrusaLink explained
- Prusa Connect Local (MINI)
- Prusa Connect setup (SL1/S)
- Prusa Mobile App
- PrusaLink (SL1/SL1S)
- Sending G-codes to printer via network (PrusaConnect, PrusaLink, Octoprint)
Relevant for:
Last updated 2 months agoThis article is also available in following languages: 
It is possible to connect your Prusa Pro HT90 to PrusaConnect in order to print and monitor your printer remotely.
Connecting
Go to the printer menu to More -> Settings -> Prusa Connect.
 |  |  |
Click Configure Prusa Connect, and the screen will show a QR code that can be scanned with a cell phone and a code that can be manually entered into a computer browser. Once the printer is added to Prusa Connect, a screen will confirm the addition.
 |  |  |
If you decide to enter the code manually, go to link Prusa Connect and add the code from the screen.
Was this article helpful?
Comments
Still have questions?
If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.