1. Tools necessary for this chapter

Original Prusa Enclosure assembly (1.1)

• 1. Introduction
• 2A. Preparing the printer (MK4/S & MK3.9/S)
• 2B. Preparing the printer (MK3.5 Black PSU)
• 2C. Preparing the printer (MK3S+ Black PSU)
• 2D. Preparing the printer (MK3S+ Silver PSU)
• 3. Assembling the enclosure
  1. Tools necessary for this chapter
  2. LONG vs SHORT profile
  3. Assembling the base frame: parts preparation
  4. Assembling the base frame
  5. Assembling the base frame
  6. Assembling the feet: parts preparation
  7. Foam pads installation
  8. Assembling the feet
  9. Attaching the anti-vibration pads
  10. Assembling the bottom panel: parts preparation
  11. Assembling the bottom panel
  12. Securing the bottom panel
  13. Installing the anti-slip dampers: parts preparation
  14. Preparing the anti-slip dampers
  15. Mounting the anti-slip dampers
  16. Assembling the supports: parts preparation
  17. Assembling the supports
  18. Assembling the supports
  19. Assembling the top frame: parts preparation
  20. Assembling the top frame
  21. Assembling the top frame
  22. Assembling the top panel: parts preparation
  23. Preparing the top panel
  24. Assembling the top panel
  25. Installing the PSU-locks: parts preparation
  26. Installing the PSU-locks
  27. Mounting the PSU-locks
  28. Assembling the hinges: parts preparation
  29. Assembling the hinges
  30. Mounting the hinges
  31. Mounting the hinges
  32. Assembling the back panel: parts preparation
  33. Assembling the back panel
  34. Assembling the back panel
  35. Assembling the side panel (right): parts preparation
  36. Assembling the side panel (right):
  37. Assembling the side panel (left): parts preparation
  38. Assembling the side panel (left)
  39. Haribo time!
  40. Well done!
  41. Select printer
• 4A. Installing the printer (MK4/S & MK3.9/S)
• 4B. Installing the printer (MK3.5 Black PSU)
• 4C. Installing the printer (MK3S+ Black PSU)
• Fire Suppression System (add-on)
• 4D. Installing the printer (MK3S+ Silver PSU)
• Hinged Lid (add-on)
• Hinged Lid with MMU3
• Hinged lid with MMU2S
• Advanced filtration system (add-on)
• Mechanical lock (add-on)
• Quick release PSU cable - MK3S+ Black PSU (add-on)
• Quick release PSU cable - MK4/3.9 Black PSU (add-on)
• White LED strip (add-on)
• Manual changelog Enclosure