JA
  • English
  • Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
Login

Manual changelog SL1

Menu

Manual changelog SL1

Manual changelog SL1
Relevant for:
SL1
Last updated a year ago
Manual changelog SL1
 Difficulty
Moderate
 Steps
3
 Available languages
ENCSPLESDEITFR

Step 1 Versions history

Versions history
Versions history
⬢Versions of the SL1 manual:
⬢07/2019 - Initial version 1.00
⬢08/2019 - Updated to version 1.01
⬢10/2019 - Updated to version 1.02

Step 2 マニュアルの変更点 (1)

マニュアルの変更点 (1)
マニュアルの変更点 (1)
マニュアルの変更点 (1)
マニュアルの変更点 (1)
⬢08/2019 - 2. Base & Tower
⬢Assembly procedure of the reflector adjusted for easier installation.
⬢New blower fan holder added. The assembly procedure adjusted accordingly.
⬢08/2019 - 4. Electronics & Lid
⬢A new cable for powering the UV LED added, same properties as the old version, just different manufacturing method.
⬢Removal of the protective film from the reflector moved just before the print display installation.
Manual version 1.01

Step 3 マニュアルの変更点 (2)

マニュアルの変更点 (2)
マニュアルの変更点 (2)
マニュアルの変更点 (2)
マニュアルの変更点 (2)
⬢09/2019 - 2. Base & Tower
⬢New M4w washer added to further improve the grounding between the parts.
⬢New revision of the Optical IR-sensor introduced. Functionality is the same. The assembly procedure remains the same as well.
⬢New revision of the Connecting rod introduced. The difference in the manufacturing process, assembly is the same.
⬢Added instructions regarding ESD safety to protect the electronics.
Manual version 1.02
Was this guide helpful?

Comments

Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us