English
Login
3D printers
Materials
Parts & Accessories
Software
3D Models
Applications
Community
Help
Academy
Blog
Company
Support
Original Prusa i3 MK3
Original Prusa i3 MK3 kit assembly
5. E-axis assembly (spiral wrap) | Textile sleeve vs spiral wrap
1. Textile sleeve vs spiral wrap
Step 1 of 53 (Chapter 6 of 14)
Fullscreen mode
Contents
Comments
Before you proceed further ensure again, you are in the correct chapter:
⬢
The longest and biggest sleeve is a spiral wrap.
If so, you can proceed according to this chapter.
⬢
If the longest and biggest sleeve is from textile
, please use this chapter instead:
5. E-axis assembly (textile sleeve)
Loading...
Next
Contents
Original Prusa i3 MK3 kit assembly
1. Introduction
Introduction
2. Y-axis assembly
3. X-axis assembly
4. Z-axis assembly
5. E-axis assembly (spiral wrap)
Textile sleeve vs spiral wrap
Tools necessary for this chapter
Idler assembly (part 1)
Idler assembly (part 2)
Idler assembly (part 3)
New printed parts - extruder body
Assembling filament sensor (part 1)
Assembling filament sensor (part 2)
Assembling filament sensor (part 3)
Assembling filament sensor (part 4)
Extruder assembly - idler (part 1)
Extruder assembly - idler (part 2)
Assembling the Extruder motor pulley (part 1)
Assembling the Extruder motor pulley (part 2)
Mounting the Extruder motor
Adjusting and tightening the pulley
Securing the Extruder idler
Mounting point for the Extruder body
New printed parts - extruder cover
Preparing the extruder cover
Inserting the E3D hotend
Mounting the extruder-cover
Preparing cooling fans
Mounting the left hotend fan
Mounting the front print fan - parts B6/R2
Mounting the front print fan - parts B7/R3
Mounting the front print fan - parts B7/R3
Mounting the front print fan - parts B7/R3
Preparing the P.I.N.D.A. probe
Mounting the P.I.N.D.A. probe
Extruder cables preparation
Mounting the Extruder
Cable for the filament sensor
Connecting the Filament sensor
Preparing the NYLON filament
Inserting the NYLON filament
Preparing the X-carriage-back (part 1)
Preparing the X-carriage-back (part 2)
Preparing the X-carriage-back (part 3)
Preparing the X-carriage-back (part 4)
Assembling the X-carriage-back
Adjusting the filament sensor cable
Mounting the X-carriage-back
Cable management using spiral wrap
Tightening the spiral wrap (Part 1)
Tightening the spiral wrap (Part 2)
Finalizing the spiral wrap
Mounting the Filament-sensor-cover (part 1)
Mounting the Filament-sensor-cover (part 2)
Mounting the Filament-sensor-cover (part 3)
Assembling the idler-plug
Mounting the fan-nozzle
E-axis is finished!
5. E-axis assembly (textile sleeve)
6. LCD assembly
7. Heatbed & PSU assembly (spiral wrap)
7. Heatbed & PSU assembly (textile sleeve)
8. Electronics assembly (B3/R2 design)
8. Electronics assembly (B7/R3 design)
9. Preflight check
Manual changelog
Comments
Log in
to post a comment
No comments
