Each Original Prusa printer is shipped with a bundle of sample G-codes. These G-codes are tested and tailored specifically for your printer model and can be used to see the printer's capabilities or troubleshoot.
Find your printer in the table and download the zip archive. The model geometry (.stl/.3mf) and the presliced version (.gcode) are included.
You can find all our sample prints, including the printable parts of our printers, on our Printables page.
Original Prusa FFF Series
| Printer model | Printer type | 3D models | G-codes |
| CORE One | FFF | link | link |
| MK4S/MK3.9S | FFF | link | link |
| MK4/MK3.9 | FFF | link | link* |
| MK3.5/S | FFF | link | link |
| MK3S+ | FFF | link | link |
| MK3S | FFF | link | link |
| MK3 | FFF | link | link |
| MINI+ | FFF | link | link |
| MINI | FFF | link | link |
| XL 1T | FFF | link | link |
| XL 2T | FFF | link | link |
| XL 5T | FFF | link | link |
| MMU3 & MK4 | FFF | link | link |
| MMU3 & MK4S | FFF | link | link |
| MMU3 & MK3S/+ | FFF | link | link |
| MMU2S & MK3S/+ | FFF | link | link |
| MMU2S & MK2.5S | FFF | link | link |
| MMU2 & MK3 | FFF | link | link |
| MMU2 & MK2.5 | FFF | link | link |
| MMU1 & MK2 | FFF | link | link |
*The archive includes G-codes for both MK4 and MK3.9 printers. G-codes are sliced for Input Shaper and older non-Input Shaper firmware. To print the Input Shaper G-codes, please make sure your printer is running firmware 5.0.0 or newer.
Original Prusa SLA Series
| Printer model | Printer type | 3D models | G-codes |
| Original Prusa SL1S | MSLA | link | link |
| Original Prusa SL1 | MSLA | link | link |
Prusa Pro FFF Series
| Printer model | Printer type | 3D models | G-codes |
| Prusa Pro HT90 | FFF | TBA | link |
2 comments
Log in to post a comment
ICUAR3D
•
Hola buenas.
He perdido los archivos de muestra que venían en el pendrive de la XL de 5 herramientas.
Donde puedo conseguirlos?
He perdido los archivos de muestra que venían en el pendrive de la XL de 5 herramientas.
Donde puedo conseguirlos?
Giuliano - Official Prusa CS
•
BerenV
•
Are these .gcode files going to be resliced with the latest Prusaslicer version? The thumbnails don't display for these sample prints on an up to date MK4. Kind of disappointing there doesn't seem to be backwards compatibility built in to display the old image formats.
Jakub Dolezal
•
Hi Beren, G-codes were resliced shortly after the new firmware was launched. It should be OK now.